Description
Ceresit CT325 is an alkali-resistant glass fibre reinforcing mesh for external wall insulation and render basecoats. It is slip-proof and tear-proof, with a 4 x 4mm grid, and bedded into the basecoat it helps stop cracking. This listing is a 1.1m x 50m roll (55m²).
In stock in our Rossendale warehouse. Order by 2pm Monday to Friday for next working day delivery to UK mainland, or collect from our trade counter.
Where to use it
- Reinforced basecoats in Ceresit Ceretherm EWI systems over EPS, XPS and mineral wool.
- Use with Ceresit ZU and CT85 basecoats.
- Use two layers (or heavier mesh) on plinths and other high-impact areas.
Coverage
Allow about 1.1m of mesh per m² of wall for overlaps, so roughly 45–50m² of wall per roll.
Installation
- Spread basecoat with a 10–12mm notched trowel and bed the mesh in until it is fully covered.
- Overlap about 10cm, and keep joints in the mesh away from board joints.
- Add diagonal patches (about 20 x 30cm) at the corners of windows and doors.
Technical data
- Weight ≥ 160 g/m²
- Mesh 4.0 x 4.0mm
- Tensile strength 2,075 / 2,180 N/5cm (warp/weft)
- After alkali ageing: 1,195 / 1,220 N/5cm








