Trade counter open to the public. Monday – Thursday 8-5, Friday 8-4. Save on delivery fees and collect

katy@pinksinsulation.co.uk | 07395949258 / 01706 584721

Ceresit CT325 Glass Fibre Mesh 55sm

CT84-1

Description

Ceresit CT325 is an alkali-resistant glass fibre reinforcing mesh for external wall insulation and render basecoats. It is slip-proof and tear-proof, with a 4 x 4mm grid, and bedded into the basecoat it helps stop cracking. This listing is a 1.1m x 50m roll (55m²).

In stock in our Rossendale warehouse. Order by 2pm Monday to Friday for next working day delivery to UK mainland, or collect from our trade counter.

Where to use it

  • Reinforced basecoats in Ceresit Ceretherm EWI systems over EPS, XPS and mineral wool.
  • Use with Ceresit ZU and CT85 basecoats.
  • Use two layers (or heavier mesh) on plinths and other high-impact areas.

Coverage

Allow about 1.1m of mesh per m² of wall for overlaps, so roughly 45–50m² of wall per roll.

Installation

  • Spread basecoat with a 10–12mm notched trowel and bed the mesh in until it is fully covered.
  • Overlap about 10cm, and keep joints in the mesh away from board joints.
  • Add diagonal patches (about 20 x 30cm) at the corners of windows and doors.

Technical data

  • Weight ≥ 160 g/m²
  • Mesh 4.0 x 4.0mm
  • Tensile strength 2,075 / 2,180 N/5cm (warp/weft)
  • After alkali ageing: 1,195 / 1,220 N/5cm

Additional information

Brand

CHARACTERISTICS

  • Alkali-resistant glass-fibre reinforcing mesh
  • Designed for use with Ceresit exterior insulation and finishing systems
  • Provides enhanced tensile strength and crack resistance
  • Open-weave structure allows for easy embedding in base coat
  • Helps to distribute stresses and prevent cracking
  • Made from specially treated glass fibres resistant to alkali attack
  • Ensures long-lasting performance and durability
  • Easy to apply on a variety of substrates, including concrete, masonry, and existing renders
  • Essential component of Ceresit’s exterior insulation and finishing systems
  • Contributes to the overall strength, stability, and longevity of the installation
  • High-quality construction and proven performance
  • Reliable choice for ensuring the integrity and long-term protection of exterior wall systems

APPLICATION

  • Apply a layer of Ceresit base coat to the prepared substrate, ensuring an even, smooth finish.
  • Immediately embed the Ceresit CT325 glass-fibre reinforcing mesh into the wet base coat, pressing it firmly into the surface.
  • Cut the mesh to size as needed, ensuring a minimum 10 cm (4 inch) overlap at all joints.
  • Use a trowel or roller to ensure the mesh is fully embedded and there are no air pockets or wrinkles.
  • Overlap the mesh edges by a minimum of 10 cm (4 inches) to create a continuous reinforced layer.
  • Ensure the mesh is fully embedded and not visible through the final base coat layer.
  • Allow the base coat with the embedded mesh to dry completely, as per the manufacturer’s recommended drying time.
  • Once dry, apply a second coat of Ceresit base coat over the reinforced layer, ensuring full coverage and a smooth finish.

Datasheets

Ceresit CT325

£72.00

In stock – next working day deliveryOrder by 2pm Mon–Fri. UK mainland. Sent from our Rossendale warehouse.

You may also like...

  • Ceresit CT190 Mineral Wool Flex Basecoat 25kg

    £22.80

    View Product
  • Ceresit CT85 Flex Adhesive & Base Coat 25kg | EPS

    £16.99

    View Product
  • Ceresit CT16 Quarz Contact Primer Pallet Deal 44x 10L

    £1,672.00

    View Product
  • Ceresit ZU Adhesive and Base Coat Render 25kg

    £14.00

    View Product

Other Products

🏗 Get a Bulk Quote