katy@pinksinsulation.co.uk | 07395949258 / 01706 584721

Installing Celotex Full Fill Cavity Wall Insulation is a straightforward process that can significantly improve the energy efficiency and thermal performance of your building. In this comprehensive guide, we’ll walk you through the step-by-step installation process, ensuring a successful insulation project.


Before you begin the installation process, it’s essential to gather all the necessary materials and tools. You will need Celotex Full Fill Cavity Wall Insulation boards, a utility knife or insulation saw, safety gloves, protective eyewear, a tape measure, and a suitable adhesive if required.

Step 1: Measure and Prepare the Area:

Start by measuring the cavity or space in the wall where you’ll be installing the insulation. Use a tape measure to ensure accuracy. Ensure that the cavity is clean and free from any debris or obstructions that could affect the installation process.

Step 2: Cut the Insulation Boards:

Using a utility knife or insulation saw, cut the Celotex Full Fill Cavity Wall Insulation boards to the appropriate size to fit snugly into the cavity. Be sure to wear safety gloves and protective eyewear during this step to prevent any injuries.

Step 3: Insert the Insulation Boards:

Carefully insert the cut insulation boards into the cavity, ensuring they fit tightly and fill the space. If necessary, use a suitable adhesive to secure the boards in place. Take care not to compress the insulation, as this can reduce its effectiveness.

Step 4: Seal the Joints:

Once all the insulation boards are in place, seal any joints or gaps between the boards using a suitable sealant or tape. This will help prevent air leakage and ensure maximum thermal performance.

Step 5: Install Vapour Control Layer (if required):

If your building requires a vapor control layer, install it over the insulation boards according to the manufacturer’s instructions. This layer helps to prevent moisture from entering the wall cavity, reducing the risk of condensation and damp issues.

Step 6: Complete the Wall Assembly:

Once the insulation and vapour control layer (if required) are installed, complete the wall assembly as per your building’s construction specifications. This may involve installing plasterboard or other finishing materials over the insulation to create a finished wall surface.

Step 7: Inspect and Test:

After completing the installation, inspect the wall carefully to ensure that the insulation is properly installed and there are no gaps or areas of compression. Conduct any necessary tests to assess the thermal performance of the wall and ensure it meets the required standards.

Final Thoughts:

Installing Celotex Full Fill Cavity Wall Insulation is a crucial step in improving the energy efficiency and thermal comfort of your building. By following this step-by-step guide, you can ensure a successful insulation project that will provide long-lasting benefits for your property.

Leave a Reply

Your email address will not be published. Required fields are marked *