K Rend K1 Spray Ivory Pallet Deal 40x 25kg

Description

40X 25KG BAGS

K1 Spray is a cement based through coloured render and provides a fine texture finish.

PRODUCT DESCRIPTION

K1 Spray is designed for use with most render spray machines but can also be hand applied. It is ideal for larger projects where the speed of machine application can offer time saving benefits. K1 Spray provides a fine texture finish.

K1 Spray Technical Data
One coat / 2 passes onto 7 newton block require:	26 – 32kg / sq m approx. \| nominal 16 – 20mm thickness
Over Base Coat require:	18kg / sq m approx. \| nominal 10mm thickness

Application Instructions
ONE COAT / FINISH COAT One coat is applied directly onto block work (please seek advice from our Technical Support Team) and must be finished to a minimum of 16mm thick to avoid ‘ghosting’ The material should be applied 18mm thick in 2 passes; the first pass 6-8mm and the second pass 12-14mm. (See also under Spray Application). After setting, 2mm is scraped off for a 16mm finish If the material is being used in a two coat application the finish coat is applied over a K Rend Base Coat to line level, using a Darby or straight edge, to a minimum thickness of 10-12mm. When straightening, hollows should be filled out immediately before a skin is formed Care should be taken to avoid small hollows, which can make it difficult to achieve a good finish. Small areas such as quoins, reveals and bands can be left with a plastic float Do not polish.

Application Instructions

ONE COAT / FINISH COAT

One coat is applied directly onto block work (please seek advice from our Technical Support Team) and must be finished to a minimum of 16mm thick to avoid ‘ghosting’
The material should be applied 18mm thick in 2 passes; the first pass 6-8mm and the second pass 12-14mm. (See also under Spray Application). After setting, 2mm is scraped off for a 16mm finish
If the material is being used in a two coat application the finish coat is applied over a K Rend Base Coat to line level, using a Darby or straight edge, to a minimum thickness of 10-12mm. When straightening, hollows should be filled out immediately before a skin is formed
Care should be taken to avoid small hollows, which can make it difficult to achieve a good finish. Small areas such as quoins, reveals and bands can be left with a plastic float
Do not polish.

Additional information

Colours	Ivory

Description

PRODUCT DESCRIPTION

Additional information

See Technical Data Sheet

Datasheets

K1 SPRAY TDS

You May Also Like

Account

About

Legal

Contact Us

K Rend K1 Spray Ivory Pallet Deal 40x 25kg

Description

PRODUCT DESCRIPTION

Additional information

See Technical Data Sheet

Datasheets

K1 SPRAY TDS

You May Also Like

Related products

Thistle Multi-Finish Multi Finish Pallet Deal 56x 25kg

C Stud 3000mm Pack (10 per pack)

MF6A Edge Trim 3600mm

Knauf Plasterboard Square Edge Wallboard - 2400 x 1200 x 12.5mm

Account

About

Legal

Contact Us