katy@pinksinsulation.co.uk | 07395949258 / 01706 584721

K Rend HP14 Base Coat Pallet Deal 40x 25kg



HP14 Base Coat is a preparation coat for K Rend top coat finishes.


HP14 Base Coat can be hand or machine applied. It uses “High Polymer” technology for an enhanced performance onto a wide variety of insulating substrates such as enhanced polystyrene, phenolic and mineral wool. It is designed as the ideal background for thin coat organic resin render such as Silicone TC. Alkali Resistant Reinforcing Mesh should be used in conjunction with HP14 Base Coat at stress points such as door and window reveals.

Technical Data
Require: 8 – 11kg / sq m approx.

| nominal 4-6mm thickness onto insulation substrates

Application Instructions
  • Primary Coat, where required should be applied to substrates as preparation for subsequent coats. Thickness should be as per product specification. It is important to take special care to straighten with a Darby / straight edge to ensure that the next coat is applied to uniform level
  • Form a light key only
  • Allow 24 hours curing time before further application, unless advised otherwise. For info on unusual substrates, seek technical advice.


Additional information



See Technical Data Sheet



You May Also Like