Trade counter open to the public. Monday – Thursday 8-5, Friday 8-4. Save on delivery fees and collect

katy@pinksinsulation.co.uk | 07395949258 / 01706 584721

K Rend HP12 Base Coat Pallet Deal 40x 25kg

Description

Pallet deal: 40 x 25kg bags of K Rend HP12 high polymer base coat at a bulk trade price. Full product details are below.

In stock in our Rossendale warehouse. Order by 2pm Monday to Friday for next working day delivery to UK mainland, or collect from our trade counter.

Pallet delivery: a £60 + VAT pallet charge per pallet is added at checkout.

K Rend HP12 is a polymer modified, cement based base coat using high polymer technology for better adhesion and water resistance on difficult substrates. It is the one to reach for on dense block, unpainted render, brickwork and render carrier boards, and it works as a stipple or scud coat as well as a straight backing coat. Supplied in 25kg bags, in stock at our Rossendale trade counter.

Coverage

  • 1.8kg per mm thickness per m²
  • Approximately 6-9kg/m² at a nominal 4-6mm
  • Roughly 3-4m² per 25kg bag at that thickness
  • Up to 12mm thickness onto masonry substrates

Mixing and application

  • Add 4-5 litres of clean water per 25kg sack
  • Mix for at least 5 minutes to break down the additives
  • Apply by hawk and trowel, or machine apply
  • Rule off flat with a darby or straight edge, then scratch lightly to key for the next coat
  • Allow 24 hours before applying the next coat unless advised otherwise
  • Substrate temperature must be above 3°C and below 30°C. Avoid elevations in direct sunlight
  • Alkali resistant reinforcing mesh is required at stress points such as door and window reveals

Specification

  • Compressive strength: CS III
  • Capillary water absorption: category W2
  • Thermal conductivity: P=50% 0.35, P=90% 0.40 W/mK
  • Shelf life 12 months stored dry above 5°C
  • Contains cement — wear goggles, mask, gloves and coveralls

What it goes with

HP12 can be used under all K Rend finishes including Scraped Texture, Thin Coat, Dash, Roughcast and Brick Rend. On brickwork it should be used with K Rend R7 Primer. It can also be used as an insulation bedding adhesive for polystyrene boards onto masonry, with appropriate mechanical fixings.

Buying a full elevation? The pallet deal of 40 x 25kg bags works out cheaper per bag.

Buying from Pinks

In stock for UK-wide delivery or collection from our trade counter in Crawshawbooth, Rossendale. We stock the full K Rend range alongside Ceresit, Fassa Bortolo, Ecorend, Parex and VPI, so if you need a full system priced up — base coat, mesh, primer and top coat — call us and we will do the take-off with you.

Additional information

Colours

Grey

Brand

See Technical Data Sheet

Datasheets

K RENDHP12 TDS

£587.10

In stock – next working day deliveryOrder by 2pm Mon–Fri. UK mainland. Sent from our Rossendale warehouse.

Other Products

🏗 Get a Bulk Quote