Description
Ceresit CT710 Visage is a decorative render that looks like natural stone. It is a resin-based, ready-to-use plaster with a granite or sandstone effect, and a hard-wearing finish that is easy to clean. That makes it a good choice for plinths, entrances, stairwells and corridors, and as the finish coat on Ceresit Ceretherm EWI systems. It comes in a 20kg tub.
In stock in our Rossendale warehouse. Order by 2pm Monday to Friday for next working day delivery to UK mainland, or collect from our trade counter.
Where to use it
- Cement and cement-lime renders (over 28 days old) and concrete (over 3 months), primed with CT16.
- Over CT85 reinforced basecoats on EWI (over 3 days old), primed with CT16.
- Indoors on gypsum, plasterboard and chipboard: prime with CT17, then CT16.
Coverage
Approx. 3.0 kg/m² for most colours (4.5–5.0 kg/m² for Mozambic Graphite). That is roughly 6–7m² per 20kg tub.
Application
- Mix with a slow drill and paddle, adding up to 1% water.
- Apply with a steel float held at an angle, then smooth with a plastic float while the mica still shows. Stencils can be used for patterns.
- Apply between +10°C and +25°C, below 80% humidity, and out of strong sun. It is rain-resistant after about 3 days.
Technical data
- Vapour permeability V2, water absorption W2 (EN 15824)
- Impact resistance cat. II
- Fire class B-s1,d0 in Ceretherm Visage system
- 10 colours, including Malaga Cream, Norway Grey, Etna Grey and California Sand










