Description
Fassa MS 20.2 is a general-purpose cement and lime render with low water absorption, for exterior and interior walls. Use it as a base coat or scratch coat on brick, block and rough concrete, applied by hand or machine. This listing is a single 25kg bag.
In stock in our Rossendale warehouse. Order by 2pm Monday to Friday for next working day delivery to UK mainland, or collect from our trade counter.
Where to use it
- Brick, concrete block and rough concrete, inside and out.
- Prime smooth concrete first with Fassa SP 22.
- Embed alkali-resistant glass fibre mesh at joints between different materials. Bed it into the render, not fixed to the wall.
Coverage
Approx. 15 kg/m² per 10mm, so roughly 1.4m² per 25kg bag at the 12mm minimum. Apply at least 12mm in one coat. For up to 20mm, apply two coats, the second before the first hardens.
Application
- Mix with 19–21% clean water for no more than 3 minutes, and use within 2 hours.
- Float 45 minutes to 2 hours after application, depending on conditions.
- Minimum +5°C. Protect from frost, strong wind and fast drying. In summer, damp down for a few days.
Technical data
- EN 998-1: GP-CS III-W2
- Capillary absorption W2
- Vapour resistance µ < 15
- Grain size < 1.5mm
- Hardened density approx. 1,650 kg/m³









